4YRSSunmeta Digital Graphic Co., Ltd.
Sunmeta Digital Graphic Co., Ltd., located in one of the most famous commodity cities - Yiwu, Zhejiang Province, was established in 2004. We have been engaged in developing high and new technology as well as popularizing it to the market since the establishment. Our products are sold well in different countries and regions around the world. We also have won a high reputation for our good quality and satisfactory after-sales service by our customers from both at home and abroad. Our main business: Flatbed multi-printers, relevant accessories, Plate Presses, Tile Presses, Mug Presses, Dye-sublimation Ink systems, and Rock photos; technology of Crystal Image and Dye-Sublimation Transfer Aiming at pursuing beauty and creating a DIY life for you, we sincerely welcome customers from at home and abroad to visit us.
4.9/5
Satisfied
26 Reviews
  • Transaction level
  • 160 Transactions
    250,000+
  • Response Time
    <24h
  • Response Rate
    73.1%

PRODUCT CAPACITY

Factory Information

Factory Size
10,000-30,000 square meters
Factory Country/Region
NO. 179 Chouyi Road, Yiting Town, Yiwu City, Zhejiang Province, China
No. of Production Lines
6
Contract Manufacturing
OEM Service OfferedDesign Service OfferedBuyer Label Offered
Annual Output Value
US$5 Million - US$10 Million

Annual Production Capacity

Product Name
units Produced
highestEver
unit Type
Verified
Sublimation Ceramic Products
8000000
Piece/Pieces
3D Sublimation Machine
30000
Set/Sets
Verified

R&D CAPACITY

Production Certification

Picture
Certification Name
Certified By
Business Scope
Available Date
Verified
CE
ECM
The product(s) has been verified on a voluntary basis.The product(s) satisfies the requirements of the safety Compliance Mark of ECM. in reference to the above listed Standard(s).The above Certification Mark can be affixed on the product(s) accordingly to the ECM regulation about its release an its use. Regulation can be found at www.entecerma.it Other relevant Standards and/or Directives have to be observed in case they are applicable. Whereas the Manufactuere is responsible of the CE certification of the product(s) and not exempted to perform all the necessary activifies before placing the product(s) on the market. The Macufacturer is aiso responsible to maintain efficient the internal production control to ensure the This certificate can be checked for validity at www.entecerma.it
2015-02-10 ~ 2020-02-09
CE
ECM
The verification of Compliance has been issued on a voluntary basis. ECM confirms that a Technical Construction File (TCF) is existent for the above listed product(s). The TCF satisfactorily covers the essential requirements of the above listed Directive(s). Oher relevant Directives have to be observed in case they are applicable. This Document is only valid for the equipment and configuration described and in conjunction with the TCF detailed above. Whereas the Manufacturer is responsible of the certification of the product(s) and not exempted to perform all the necessary activities before placing the product(s) on the market. The Manufacturer is also responsible of the internal production control to ensuer the product(s) are in compliance with the essential requirements of the above mentioned Directive(s). This certificate can be checked for validity at www.entecerma.org
2014-01-01 ~ 2019-01-01
CE
ECM
The product(s) has been verified on a voluntary basis. The product(s) satisfies the requirements of the Certification Mark of ECM, in reference to the above listed Standard(s). The above Compliance Mark can be affixed on the product(s) accordingly to the ECM regulation about its release and its use. The regulation can be found at www.entecerma.it. This Certificate of Compliance can be checked for validity at www.entecerma.it This verification doesn't imply assessment of the production of the product(s). Additional information, clarification about the Marking: We attest that a TCF for the Marking process is in place. Whereas the Manufacturer is Responsible to start the Marking Certification Procedure and to perform all the necessary activities, as required by the Directive before placing the Mark on the product(s).
2017-10-10 ~ 2022-10-09
CE
celab
After inspection of the technical documentation issued by the customer, and in his request, we express our opinion that the product meets the technical requirement of the following directives and standards: 2006/95/EC Low Voltage (LVD) 2004/108/EC Electromagnetic compatability (EMC) This opinion is only valid for the directive, the equipment and configuration described, in conjunction with the test data detailed above and with compliance with all applicable legal requirement for the product .
2015-09-09 ~ 2019-09-08
CE
ECM
The verification of Compliance has been issued on a voluntary basis. ECM confirms that a Technical Construction File (TCF) is existent for the above listed product(s). The TCF satisfactorily covers the essential requirements of the above listed Directive(s). Oher relevant Directives have to be observed in case they are applicable. This Document is only valid for the equipment and configuration described and in conjunction with the TCF detailed above. Whereas the Manufacturer is responsible of the certification of the product(s) and not exempted to perform all the necessary activities before placing the product(s) on the market. The Manufacturer is also responsible of the internal production control to ensuer the product(s) are in compliance with the essential requirements of the above mentioned Directive(s). This certificate can be checked for validity at www.entecerma.org
2013-02-01 ~ 2018-02-01
CE
ECM
The product(s) has been verified on a voluntary basis.The product(s) satisfies the requirements of the safety Compliance Mark of ECM. in reference to the above listed Standard(s).The above Certification Mark can be affixed on the product(s) accordingly to the ECM regulation about its release an its use. Regulation can be found at www.entecerma.it Other relevant Standards and/or Directives have to be observed in case they are applicable. Whereas the Manufactuere is responsible of the CE certification of the product(s) and not exempted to perform all the necessary activifies before placing the product(s) on the market. The Macufacturer is aiso responsible to maintain efficient the internal production control to ensure the This certificate can be checked for validity at www.entecerma.it
2015-02-10 ~ 2020-02-09
CE
ECM
The product(s) has been verified on a voluntary basis.The product(s) satisfies the requirements of the safety Compliance Mark of ECM. in reference to the above listed Standard(s).The above Certification Mark can be affixed on the product(s) accordingly to the ECM regulation about its release an its use. Regulation can be found at www.entecerma.it Other relevant Standards and/or Directives have to be observed in case they are applicable. Whereas the Manufactuere is responsible of the CE certification of the product(s) and not exempted to perform all the necessary activifies before placing the product(s) on the market. The Macufacturer is aiso responsible to maintain efficient the internal production control to ensure the This certificate can be checked for validity at www.entecerma.it
2015-02-10 ~ 2020-02-09
CE
CELAB
After inspection of the technical documentation issued by the customer, and in his request, we express our opinion that the product meets the technical requirement of the following directives and standards: 2006/95/EC Low Voltage (LVD) 2004/108/EC Electromagnetic compatability (EMC) This opinion is only valid for the directive, the equipment and configuration described, in conjunction with the test data detailed above and with compliance with all applicable legal requirement for the product .
2015-09-09 ~ 2019-09-08
CE
ECM
The product(s) has been verified on a voluntary basis. The product(s) satisfies the requirements of the Certification Mark of ECM, in reference to the above listed Standard(s). The above Compliance Mark can be affixed on the product(s) accordingly to the ECM regulation about its release and its use. The regulation can be found at www.entecerma.it. This Certificate of Compliance can be checked for validity at www.entecerma.it This verification doesn't imply assessment of the production of the product(s). Additional information, clarification about the Marking: We attest that a TCF for the Marking process is in place. Whereas the Manufacturer is Responsible to start the Marking Certification Procedure and to perform all the necessary activities, as required by the Directive before placing the Mark on the product(s).
2017-10-10 ~ 2022-10-09
Verified

Certification

Picture
Certification Name
Certified By
Business Scope
Available Date
Verified
Supplier Assessment
BV
Company Overview Human Resources Current Export Situation Export Business Capacity Production Capacity Quality Assurance Production Process Management R&D Capacity Company Development/Expansion Plans Production Flow Certification&Photos Company and Product Samples
2013-01-16 ~
Audited Supplier
SGS
1.General Information 2.Product Research&Development Capacity 3.Production Capacity&Quality Control 4.Photos
2015-04-03 ~
Verified

Trademarks

Picture
Trademark No
Trademark Name
Trademark Category
Available Date
Verified
13886292
FREESUBLI
Machinery>>Printing Machine>>Heat Press Machines
2015-04-14 ~ 2025-04-13
6192467
PHOTO CRYSTAL
Gifts & Crafts>>Crafts>>Crystal Crafts
2010-06-14 ~ 2020-06-13
6192468
SUNMETA
Home & Garden>>Kitchen, Dining & Bar>>Drinkware>>Glass
2010-02-07 ~ 2020-02-06
15031452
FreeSUB
Machinery>>Printing Machine>>Heat Press Machines
2015-08-14 ~ 2025-08-13
6192465
shangmeite
Home & Garden>>Kitchen, Dining & Bar>>Drinkware>>Mugs,Gifts & Crafts>>Crafts>>Crystal Crafts,Home & Garden>>Kitchen, Dining & Bar>>Drinkware>>Glass
2010-04-21 ~ 2020-04-20
15031674
FreeSUB
Machinery>>Printing Machine>>Heat Press Machines,Home & Garden>>Kitchen, Dining & Bar>>Drinkware>>Mugs
2015-08-14 ~ 2025-08-13
6192466
SUNMETA
Construction & Real Estate>>Tiles & Accessories>>Tiles
2010-02-07 ~ 2020-02-06
Verified

Patents

Picture
Patent No
Patent Name
Patent Type
Available Date
Verified
ZL 2013 2 0845257.8
ZL 2013 2 0845257.8
UTILITY_MODEL
2013-05-28 ~ 2023-12-04
ZL 2014 2 0508672.9
ZL 2014 2 0508672.9
UTILITY_MODEL
2014-12-24 ~ 2024-09-01
ZL 2014 3 0067725.3
ZL 2014 3 0067725.3
APPEARANCE_DESIGN
2014-03-25 ~ 2024-03-24
ZL 2014 2 0103510.7
ZL 2014 2 0103510.7
UTILITY_MODEL
2014-08-20 ~
ZL 2014 2 0103539.5
ZL 2014 2 0103539.5
UTILITY_MODEL
2014-07-16 ~ 2024-03-05
ZL 2014 2 0103556.9
ZL 2014 2 0103556.9
UTILITY_MODEL
2014-12-10 ~ 2024-03-05
ZL 2014 2 0508693.0
ZL 2014 2 0508693.0
UTILITY_MODEL
2014-12-24 ~
ZL 2014 2 0103536.1
ZL 2014 2 0103536.1
UTILITY_MODEL
2014-07-16 ~
ZL 2014 2 0508702.6
ZL 2014 2 0508702.6
UTILITY_MODEL
2014-12-24 ~ 2024-09-01
ZL 2013 3 0636164.X
ZL 2013 3 0636164.X
APPEARANCE_DESIGN
2014-05-28 ~
ZL 201430466415.9
Heat press machine (st-4050)
APPEARANCE_DESIGN
2015-08-19 ~ 2024-11-22
ZL 2013 2 0845273.7
ZL 2013 2 0845273.7
UTILITY_MODEL
2014-07-30 ~ 2023-12-04
ZL 2014 3 0466426.7
3d subliamtion vacuum machine (st-420)
APPEARANCE_DESIGN
2015-08-19 ~ 2024-11-22
ZL 2012 2 0534803.1
ZL 2012 2 0534803.1
UTILITY_MODEL
2013-03-20 ~ 2022-10-07
Verified

Research & Development

5 - 10 People

TRADE CAPABILITIES

Trade Shows

Main Markets & Product(s)

Main Markets
Total Revenue(%)
Main Product(s)
Verified
South America
16.40%
Western Europe
14.32%
Central America
11.81%
Southern Europe
9.21%
Eastern Europe
8.98%
Southeast Asia
8.01%
Mid East
7.90%
South Asia
5.27%
Eastern Asia
3.99%
North America
3.83%
Oceania
3.65%
Africa
3.48%
Northern Europe
3.15%
Verified

Trade Ability

No. of Employees in Trade Department
11-20 People
Average Lead Time
15
Total Annual Revenue
US$1 Million - US$2.5 Million

Business Terms

Accepted Delivery Terms
FOB, CIF, EXW
Accepted Payment Currency
USD, EUR, CNY
Accepted Payment Type
T/T, L/C, MoneyGram, PayPal, Western Union, Cash
Nearest Port
Ningbo, Shanghai